| Packaging |
Gallon and Can
|
| Product Features |
• It is not affected by outdoor weather conditions, rain, snow, extremely hot, or extremely cold weather.
• Since it is resistant to ultraviolet rays, the color does not fade, crack, or effloresce. Due to its high water vapor permeability, it allows water vapor to escape. It is resistant to alkaline substances and is anti-algae and anti-mold.
• It has high covering power.
• This product is water-based, odorless, and does not harm the environment.
|
| Application Area |
For exterior facades, it can be used on surfaces such as plaster, impure concrete, cement sheets, and corrugated sheets with the appropriate primer.
|
| Application Method |
After cleaning any contamination, raised paint, and dust from the surface where you intend to use this product, if there are uneven areas, smooth them using a thin layer of Sandora acrylic putty.
• Surfaces that have been previously painted or are to be newly painted should be primed using multi-purpose primer.
|
| Recommendations |
• Use a primer similar to the paint being used. Before use, stir it well. Dilute the product with a maximum of 10-15% clean water and apply it in 2 coats using a brush, roller, or spray system.
• Wait a maximum of 6 hours between coats. Do not use this product in extremely hot weather, windy conditions, or under direct sunlight.
• During and within 24 hours of using this product, ensure that the temperature of the surface and the environment is not below +5°C. Hand tools used during work can be cleaned with water after finishing the job.
• To prevent color inconsistency on the facade, use products with the same batch number. If you wish to use products with different batch numbers, mix them thoroughly in a wide container.
• Consumption:
Depending on the smoothness of the surface and the method of application, the consumption is 9-11 square meters per liter for a single coat.
|
Reviews
There are no reviews yet.